Step 1. Unpack the product:
- Unpack and carefully examine the product from top to bottom.
- Report any damage and save all packing materials, if any part was damaged during transport.
- Do not attempt to use this product, if it is damaged.
Step 2. Planning the installation:
- This device installation requires planning to ensure
- successful installation with minimal complications and down time.
Step 3. User responsibilities:
- It is the responsibility of the contractor, installer, purchaser,
- owner, and user to install, maintain, and operate the device in such a manner as to comply with
- all state and local laws, ordinances, and regulations.
Step 4. Product installation steps:
- Disconnect power to fixture at source. DO NOT SIMPLY SWITCH OFF FIXTURE
- Remove existing fluorescent tubes and safely set aside.
- Disconnect (cut) wires to ballast leaving enough wire to be tied off with wire nuts.
- Tie-off remaining wires attached to ballast with wire nuts.
- See wiring diagram shown on reverse for your type lamp fixture (i.e., 1-bulb, 2-bulb, 4-bulb and etc.) and re-wire fixture.
- Install Aladdin LED Retrofit Tube(s) into fixture.
- Affix included warning labels to fixtures near lamp connection/sockets of fixture so they are visible to bulb installers.
- Re-connect power supply and turn on switch. Tube will light.
